Heartbeat of Hohm Tech
PERFORMANCE | CAPACITY | SAFETY
Advanced Battery Chemistry
-
We emphasize safety while aiming for chart-topping performance.
-
TIRED OF COUNTERFEITS? So are we. Every Hohm Tech cell comes standard with a proprietary embossed power guard to ensure authenticity.
18650: HOHM LIFE4 | WORK2 | ALONE
18650 (NEW): HOHM DEPOT | MEGA
20700: SHERLOCK2 HOHM
21700: HOHM RUN | RUNXL
26650: HOHM GROWN2
Specifications
-
Started with raw materials sourced from multiple renowned providers
-
Lowered internal resistance by a multitude of various internal modifications (used UHPAI for cathode tag, shortened cathode tag, among other mods)
-
After 1000’s of trials and tests, we zero’d in on the perfect combination of what we call PPLS (Price, Power, Longevity, & Safety)
-
Expanded our safety efforts by placing a stronger bitumen compound Poly Seal in every battery
-
2547mAh | 25.3A CDR | 35.8A @ 80oC cut-off
-
Can be charged at a tested/proven 3.82A rating: Yes, 3.82, as in THREE POINT EIGHT TWO. It is possible, tested, proven, and approved**
-
Phenomenal amperage delivery to drive power demanding devices
-
Purest form of Li-NMC (Nickel [Ni], Manganese [Mn], Cobalt [Co]) used to date
-
Exceeds all previous designs and chemistry results with greater amperage and capacity
-
EPTC (Enhanced Positive Thermal Coefficient): Reduction in Thermal Runaway potential
-
Updated Poly Seal: Enhances security of seal & proper operation
-
Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)
-
Ahead of schedule chem bonding to U-Mn specifications: one of many processes conducted to achieve documented specs
-
NEW chemical stimulation and unity process achieves greater purity: Cycle Life is increased to 69% nominal average of original capacity
-
NEW meld process over 7kHz: results in charge rate capable of 3.82A
-
Ahead of schedule chem bonding to Li-Mn specifications
-
Phenomenal amperage-to-capacity ratio to drive power demanding devices
-
NEW HT 5-brace embossed top to alleviate impostures from distributing fakes in the industry
-
Many proprietary processes conducted to achieve documented specs
-
3309mAh | 15.3A CDR | 19.6A @ 80oC cut-off
-
Can be charged at a tested/proven 4.14A rating: Yes, 4.14, as in FOUR POINT ONE FOUR. It is possible, tested, proven, and approved**
-
NEW NiMnCo Meld over 7kHz: process increases charging rate to 4.14A (1.25C) compared to standard 0.5C – 1C rates of Li-NMC formulation
-
Utilizing industry-unique QSP Li-NMC (4x raw compound wash)
-
Exceeds all previous designs and chemistry results with greater amperage-to-capacity ratio in 18650 format
-
EPTC (Enhanced Positive Thermal Coefficient): Reduction in Thermal Runaway potential
-
Purpose-built to take on both high amperage and high capacity tasks simultaneously. Utilizing proprietary structure, top cap, and QSP chemistry in the Li-NMC family. More amps ~ cooler temps ~ even safer.
-
Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)
-
3005mAh | 16.8A CDR | 22.5A @ 80oC cut-off
-
Can be charged at a tested/proven 3.60A rating with minimal impact to degradation
-
Amperage delivery at sustained voltages ensures powering relevant loads
-
Recalibrated chemistry formula comprised of DSP compounds
-
Progressive amperage-to-capacity and capacity-to-weight
-
EPTC (Enhanced Positive Thermal Coefficient): Reduction in Thermal Runaway potential
-
Equipped with the UPS sealing compounds as an extended assurance of proper operation and performance
-
DSP (Dual Stripping Process) formula and selection of raw chemistry achieves a greater cycle life than any previous Hohm Tech cell
-
2nd Gen Cathode Tag integration to promote reduction in internal resistance
-
NEW slurry stir process enables greater consistency and minimizes cell-to-cell variation
-
Proprietary ACT (Anti-Counterfeit Top) embossment on every Hohm Tech cell
-
UPDATED test procedures validate greater cycle life for the Hohm Tech DSP cells
-
2505mAh | 22A CDR | 29.5A 80oC cut-off
-
Can be charged at a tested/proven 4.14A rating: Yes, 4.14, as in FOUR POINT ONE FOUR. It is possible, tested, proven, and approved
-
Designed to drive both inefficient and power-demanding devices to help get to where you need to
-
Utilizing the DS (2x Stripping) process; resulting in an effective method of consistent performance
-
As all cells, it too is enabled with the OLC for swift understanding of capabilities
-
Built with the refined bitumen Poly Seal to secure the consistency of repeated operation
-
2nd Gen Cathode Tag integration to promote reduction in internal resistance
-
3015mAh | 22.1A CDR | 31.5A @ 80oC cut-off
-
Wattage output up 5% to 63W; Amperage up 6.8% to 22.1A CDR; Capacity up 7.4% @ >15A loads
-
Designed to feed power-hungry devices without having to swap batteries every other minute
-
Chemistry enhanced by QSP (quad stripping process), which is proven to deliver greater voltage-sag resistance
-
Exceeds all previous designs and chemistry results with greater amperage and capacity
-
A multitude of processes conducted to achieve documented specs
-
Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)
-
Updated Poly Seal: Enhances security of seal & proper operation
-
Anti-Counterfeit ‘Ohm’ embossed top to stop knock-offs/clones
-
NEW Mn bonding process that achieves greater purity: Cycle Life is increased to over 70% nominal average of original capacity
-
NEW QSP NiCo Meld over 10kHz: process increases charging rate to 4.43A from previous 4.25A
-
Production date coding now on every cell (applicable to Grown2)
-
UPDATED bonding process that achieves greater end-product purity: Cycle Life @ 80% nominal average of original capacity
-
4244mAh | 30.3A CDR | 41.1A 80oC cut-off
-
Can be charged at a tested/proven 5.30A rating: Yes, 5.30, as in FIVE POINT THREE. It is possible, tested, proven, and approved
-
Designed to feed insanely power-hungry devices without having to swap batteries every other minute
-
Now utilizing our latest Li-NMC chemistry with QS (4x Stripping) process; resulting in our purest chemistry to date
-
Exceeds all previous designs and chemistry results with greater CDR running at 8oC cooler than previous model
-
Updated Poly Seal: Enhances security of seal & proper operation
-
Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)
-
3116mAh | 30.7A CDR | 41.6A 80oC cut-off
-
Can be charged at a tested/proven 4.67A rating: Yes, 4.67, as in FOUR POINT SIX SEVEN. It is possible, tested, proven, and approved**
-
Originally developed and intended to power automobiles, it has been reformulated and equipped with a proprietary EPTC ring
-
Not reinvented, rather RE-formulated, achieving a unique blend new to Hohm Tech International
-
Since date of release, cell progression is up in all amperage and safety tests
-
EPTC (Enhanced Positive Thermal Coefficient) equipped: Reduction in Thermal Runaway potential
-
Updated Poly Seal from inception: Enhances security of seal & ensures it excels in various applications and environments
-
As with all ICHT cells, the Cathode Tag is utilizing UH Purity Aluminum: Ultra-High Purity (UHP) for internal resistance suppression
-
Ahead of schedule chem bonding to Li-Mn specifications
-
NEW bonding process that achieves greater purity: Cycle Life is increased to 69% nominal average of original capacity
-
CoO2 coalesce process unlocks 1.5C charging rates
-
World’s First NAI 20700 (non automotive intent) extended with a backing of LLI, GLI, and PLI for robust protection from start to finish
-
Proprietary “Ohm” cap to ensure utmost authenticity!
-
QSP process that achieves greater end-product purity: Cycle Life 73% @ 500 cycles of nominal average capacity
-
QSP Li-NMC | 39.1A-49.5A | 3023mAh | 3.6V
-
Can be charged at a tested/proven 5.29A rating: Yes, 5.29, as in FIVE POINT TWO NINE. It is possible, tested, proven, and approved
-
Purpose-built to exceed amperage capabilities of ALL previous non-QSP batteries
-
Utilizing our latest QSP Li-NMC processed chemistry; resulting in the purest chemistry to date
-
39.1A CDR runs from 4.2V down to 2.5V @ under 76oC MAX (Neware Analyzer | Palmer Probes | 22-25oC Ambient | No Moving Air)
-
Utilizing the proven compound in updated Poly Seal: Enhancing security of seal & proper operation
-
Cathode Tag made from UH Purity Aluminum: Ultra-High Purity (UHP)
-
QSP Li-NMC | 30.3A-38.6A | 4007mAh | 3.6V
-
Can be charged at a tested/proven 6.01A rating: Yes, 6.01, as in SIX POINT ZERO ONE. It is possible, tested, proven, and approved**
-
Development started in 2017 with intent to only power Electric Vehicles. It’s just too good to keep it restricted to only EV projects
-
Using the proprietary “Ohm” cap in a 21.5mm width; 71.4mm length structure. 100% blend new to Hohm Tech International
-
>4k capacity, >30A load, in a structure under 72g weight!
-
Utilizing same identical seal compounds as Hohm RUN to ensure battery remains sealed in hot/cold weather and applications
-
As with all ICHT cells, the Cathode Tag is utilizing UH Purity Aluminum: Ultra-High Purity (UHP) for internal resistance suppression
-
QSP Li-NMC with ample cobalt is proving to be desirable to other factories that Hohm Tech International is now licensing the technology to
-
NEW bonding process that achieves greater purity: Cycle Life is increased to >70% nominal average of original capacity
-
QSP unlocks consistent and reliable 1.5C charging rates
-
World’s First NAI 21700 (non automotive intent) cell in compliance of ATD & ANSI, while achieving IEC certification
-
-
Out of stock
